The Aluminum / Carbon Fibre Delrin Frame with 3rd Bearing is designed to improve rigidity, stability, durability and performance on the Blade mCP X helicopter. It's directly replaced the stock plastic main frame. The Aluminum / Carbon Fibre / Delrin Frame with 3rd Bearing is machined from aircraft Aluminum, Carbon Fibre and Delrin to give much greater strength & rigidity which increases performance in flight and better withstands crash damage to servo circuit boards on Blade mCP X helicopter.
The Aluminum / Carbon Fibre / Delrin Frame with 3rd Bearing design for use with any type of brushed motors or brushless motors in the same class (max. Motor Can diameter: 14mm) and also can be fine tuned the motor pinion gear from 7T up to 10T (full range Min. 6T to Max. 11T) for optimal performance.
More than that, the Tail Boom Mount is designed with a Pre-Tensioning System to keep the entire tail rudder system away from vibration. It can also be used with 2mm and 3mm Tail Boom diameter to get the best tail rudder system for your needs.
On top of that, the Aluminum / Carbon Fibre / Delrin Frame with 3rd Bearing is built with a Secured Landing Pegs System onto frame to allow pilot to easily maintain/replace the Landing Gear after a long period of use. Also, the Carbon Canopy Mount can be replaced without any extra costs by removing the screws.
And yet, the 3rd Bearing Block is added to support the main shaft under extremely high head speed condition.
Optimize Main Frame design to save weight. It's lightest in its class. (stock plactic frame with hardwares: 3.12gram, the Aluminum / Carbon Fibre / Delrin Frame with 3rd Bearing: 3.95gram)
The Aluminum / Carbon Fibre / Delrin Frame with 3rd Bearing design will bring the best performance and the best look to your Blade mCP X helicopter.

 

 

Weight

3.95gram (including 3rd Bearing)

Usage
Direct replacement part for Blade mCP X helicopter

Requires
Read and follow carefully the Assembly Instruction
Threadlock is required to apply to all mechanical screws for safety during fly
Tools

Instruction
Manual & Instruction included