The full-featured IR Programming Card allows the
user to set the following parameters:
Low Voltage
Cut-off (5V to 23V at 0.5V increments) no need to
select battery type just set the voltage the ESC
should work on, by doing this, the ESC will be
compatible with any future type of battery designs.
LVC= LOW VOLTAGE CUT: 050(5V) TO 230(23V)
BRK= BRAKE SETTING: 1: NO BRAKE, * 2: VERY SOFT
BRAKE, 3: SOFT BRAKE, 4: HARD BRAKE, 5: VERY HARD
BRAKE
AIR= ACTIVATE AIRPLANE MODE*
PCT= PROGRAM CUT TYPE (LVC TYPE): 1: CUT 50%*, 2: NO
CUT JUST LED WARNING, 3: PULSE WARNING
MAT= MOTOR ACCELERATION TIME DELAY: 1: 0.15 Seconds,
2: 0.3 Seconds*, 3: 0.45 Seconds, 4: 0.7 Seconds, 5:
1.3 Seconds
CAR/B= DISABLED
COP= CURRENT OVERLOAD PROTECTION: 1: PROTECTION ON*,
2: PROTECTION OFF (CHOOSING OPTION 2 WILL VOID
WARRANTY)
FREQ= DRIVE FREQUENCY: 1: 8 kHz *
SS= 1: SOFT START WITH OUT GOVERNOR MODE*, 2: SOFT
START WITH GOVERNOR
TIM= MOTOR TIMING: 1: AUTO TIMING*, 2: 5 Degrees, 3:
15 Degrees, 4: 20 Degrees, 5: 25 Degrees, 6: 30
Degrees
GOV= GOVERNOR CORRECTION: 1: SOFT*, 2: MEDIUM, 3:
STRONG
SB= MOTOR STARTING BOOSTER 1: SOFT, 2: MEDIUM, 3:
STRONG
SOFT START DURATION: 1. SHORT 10 Seconds, 2: MEDIUM
15 Seconds*, 3:STRONG 20 Seconds
*Factory Default